Roofing Contractor in Savannah, GA

Nothing on a house works harder than its roof, and nothing gets ignored longer. Shingles seal, shed water, and flex with the heat every day until a stain appears on a ceiling and a small repair becomes a large one. Flashing around chimneys, vents, and valleys usually fails before the shingles do, which is why a real inspection looks well past the surface. Catching those weak points early keeps quality roof replacement in Savannah, GA a planned project rather than an emergency after the next storm, with the attic and interior still in good shape when the work begins. Gutters, downspouts, and attic vents belong in that same inspection, since blocked drainage sends water back under the shingles.


Salt air, humid summers, and a steady run of tropical systems make roofing here a different job than it is on a roof built for a dry climate. Hurricane Matthew in 2016 and Hurricane Irma in 2017 both tested roofs across the city, and Hurricane Debby and Hurricane Helene followed in 2024. Wind driven rain finds every weak seam, and roofs that looked fine in calm weather can fail in a single night, while moisture that lingers between storms feeds algae, rot, and rusted flashing. That pattern creates constant demand for storm damage roof repair in Savannah, GA. Fasteners rust faster, sealant strips dry out sooner, and shaded slopes stay damp long enough for algae to take hold. The same salt air and storm track reach coastal subdivision roofing near Richmond Hill to the south, where newer homes face many of the same gusts.


Every roof we touch is treated as one system: decking, underlayment, flashing, and shingles installed to work together. That approach is how we've been an expert roofing contractor in Savannah, GA since Roofing Done Right was founded in 2023, built on more than 15 years of hands on roofing experience. Being Fortified against high winds, hail, and hurricanes matters in a city that sees all three, and we would rather explain a repair clearly than sell a replacement that is not required. Locally owned, the company writes each scope in plain terms before any work begins.

About Savannah, GA

Savannah is the seat of Chatham County and one of the oldest planned cities in the country, laid out by James Oglethorpe around a grid of public squares. The Savannah Historic District, named a National Historic Landmark District in 1966, holds 22 of those squares along with blocks of row houses, townhomes, and churches whose rooflines have shaped the skyline for generations. Flat commercial sections hide behind decorative parapets, while steep gables cap many of the older homes. Narrow lanes and tight lots in the older districts shape how crews stage materials and reach a roof.

Beyond downtown, the Victorian District, Thomas Square, Cuyler Brownville, and Ardsley Park each carry their own building styles, from ornate frame houses with deep porches to early twentieth century homes on tree lined streets. Midtown and the Southside add mid century ranches and newer subdivisions, so roof inspections here can cover slate, clay tile, standing seam metal, and asphalt shingles. Rain arrives in heavy bursts, live oaks drop limbs and leaves into valleys and gutters, and the tidal marshes keep the air salty and damp.


Housing across the wider metro area differs sharply: fast growing subdivisions west of the city, homes close to the port terminals, mixed residential and industrial streets to the north, and coastal subdivisions to the south. Roof age, tree cover, and distance from the water change in each of them, and those differences change which materials make sense when an owner manages homes in several communities.

How a Roofing Contractor Approaches Historic Roofs in Savannah, GA

Exterior work in the Landmark Historic District generally goes through city historic review, so the first step on an older Savannah property is confirming which materials and profiles are approved before anything is ordered. Slate, clay tile, and standing seam metal each have their own installation rules, and a mismatched substitute can stall a permit or draw a correction notice. Slate rewards patience, since individual pieces can often be replaced without tearing off an entire slope. Fastener type matters too, because mixed metals corrode where they touch.


Row houses and townhomes often carry low slope sections behind parapet walls, where water has to travel to a scupper or downspout without pooling against the masonry. Those sections depend on sound membrane seams, wall flashing, and drains that stay clear, and they tend to leak in ways that look like plaster damage inside rather than an obvious hole above. Tracing water back to a failed seam or a cracked coping stone is the only way to stop the leak for good. Copper and lead flashing outlast thin aluminum on masonry walls, so flashing material is chosen to match the building.


Older rafters and decking deserve a careful look as well. Decades of moisture can soften sheathing, and a new roof laid over compromised wood only hides the problem. Replacing bad boards, drying the attic space, and rebuilding flashing details before new material goes down separates a lasting repair from a temporary patch. Attic checks also uncover old tar patches that hide the real leak path. Chimneys and dormers get the same scrutiny, because cracked masonry and failed counterflashing let water in long before a stain appears.

Our Services in Savannah, GA

Fortified Roof Replacement for Savannah, GA Storm Season

The FORTIFIED Roof standard from the Insurance Institute for Business and Home Safety rests on a simple idea: wind damage usually begins at the roof edges and through the roof deck. Sealing deck seams, using upgraded fastening, and securing the drip edge and eaves give a Savannah roof far better odds when a tropical system pushes through. An inspection after the work confirms that each of those details was completed to the standard. Gable ends, overhangs, and the connection between roof and walls get the same attention as the shingles, since those are the parts a strong wind grabs first. Wind exposure looks different across open lot subdivision roofs in nearby Pooler, where gusts meet fewer trees, yet the same edge and deck details apply.


On a full replacement, the crew strips down to bare decking, replaces anything soft, and installs protective membrane at valleys and penetrations before underlayment goes on. Ring shank nails set in the correct pattern hold shingles in gusts that would peel a standard nailing job, and starter strips lock the first course along the eave. These details are invisible once the roof is finished, yet they decide how it behaves in the first serious gust. Valley metal and pipe boots are replaced rather than reused, because old rubber cracks long before shingles wear out.


Ventilation finishes the work. Balanced intake and exhaust keep attic air moving so trapped heat and humidity do not bake shingles from beneath or feed mold under the deck. Manufacturer warranties often depend on proper ventilation, so ridge vents, soffit intake, and clear attic pathways are checked before the last shingle goes down, which protects both the roof and the coverage that comes with it. Shingle color and profile are chosen to suit the house, and algae resistant options suit shaded lots under oaks.

Why Savannah, GA Residents Trust Roofing Done Right

Clarity comes first at Roofing Done Right, which makes us an experienced roofing contractor in Savannah, GA that explains what it finds before a single shingle comes off. Every inspection ends with plain answers about what is failing, what can wait, and what should be replaced now, so owners make decisions with real information. Honest guidance includes telling an owner when a repair will do.


Materials and process show in the finished roof. Products are matched to Savannah weather, fastening follows the manufacturer's pattern, and the crew cleans up after itself, a detail past customers mention in their reviews. One company handles roofing, siding, windows, and doors, so there are fewer contractors to coordinate from first inspection to final cleanup.


Hurricane season rewards preparation. A pre storm inspection checks sealant strips, flashing, and fasteners so weak points are repaired before a system arrives, and when a storm does cause damage, we document it, communicate with the insurer, and make sure repairs meet the standard the claim describes. Photographs and clear notes on each damaged component travel with the file, so Savannah owners are not left translating adjuster language on their own. Anyone with a second property can also ask about port side roof repairs in Garden City, where residue and standing water add their own wear.

Hire Us! Professional Roofing Contractor in Savannah, GA

Ready to put a plan behind that roof? Roofing Done Right serves as a professional roofing contractor in Savannah, GA that arrives with a clear scope and a straight explanation, whether the job is a leak, a failing valley, or historic slate roof repair in Savannah, GA that cannot wait. Questions about warranties and maintenance are welcome after the final nail as well.


Send us a message describing what you see, or phone us and we will book an inspection. We look at the deck, flashing, ventilation, and shingles, and the written scope lists decking repairs, flashing replacements, and ventilation upgrades as separate items, so you can compare it against any other proposal with no pressure to decide on the spot.


Historic property owners can ask about approved materials and the review process, while newer neighborhoods can ask about wind upgrades and ventilation. Request an estimate for residential roofing in Savannah, GA, and let a crew that knows the live oaks, the salt air, and the historic rooflines show you how the work should be done. Call about a leak, a storm claim, or an aging roof. Riverside owners can ask as well about industrial edge roofing just north in Port Wentworth.

What our customers have to say...

Testimonials

GET A QUOTE

Frequently Asked Questions

1. Do Historic District roofs need special approval in Savannah?

Exterior changes inside the Landmark Historic District usually go through city historic review, so materials and profiles are confirmed before ordering. Roofing Done Right helps you understand what a project needs, but final approval always comes from the city.


2. Why do Savannah roofs collect algae streaks?

Warm humid air, shade from live oaks, and long damp stretches let algae grow on shingles. We clean what is safe to clean, address the moisture sources, and recommend algae resistant shingles at replacement, since they slow the streaking that shade encourages.


3. What does a Fortified roof mean for a Savannah home during hurricane season?

A Fortified roof follows the insurance industry standard with a sealed deck, upgraded fastening, and protected edges, which helps in the wind that follows tropical systems along the coast. Standard replacements can skip those extras, so we explain which steps suit your house.


4. How are slate and clay tile roofs on older Savannah row houses repaired?

Individual slates or tiles can often be replaced without stripping a whole slope. We match the material, swap corroded fasteners for compatible ones, and rebuild failed flashing, which is where most leaks on older slate and tile roofs begin.


5. How does salt air from the marshes around Savannah affect flashing and fasteners?

Salt and humidity corrode fasteners and thin flashing faster than dry air does, and mixed metals speed the damage. We use compatible metals, seal every penetration, and check those details first when a leak shows up near a chimney or vent.


6. What should a Savannah owner do after a hurricane passes and the roof looks fine?

Check ceilings and the attic for stains, then walk the yard for shingle pieces and bent flashing. Damage from strong wind often shows up later. We inspect the roof, photograph each finding, and document it for your insurer.


Document